New Products
Product Bulletin
ETAF
0...10VDC Fan Speed Output LCD thermostat

The ETAF 0...10VDC Fan Speed Output Standalone LCD Fan Coil Thermostats are designed to control heating, cooling, or year round air conditioning units in commercial, industrial and residential Installation.  Typical application includes the control of fan coil units, packaged terminal air conditioners and combination heating and cooling equipment.  As part of the system that consists of    two-way or three-way valve and a multi-speed line voltage fan.

 

Supply Voltage:         110-230 V, 50/60 Hz
Setpoint Range:        5…35 oC
Shipping Weight:       350 g

Product Bulletin
NC24A
Modbus RTU Universal Controller
NC24A RS485 Modbus RTU networking   LCD universal controller applies communication technology of Modbus RTU master/slave protocol to monitor and supervise year around air conditioning units in commercial, industrial and residential Installation. Measurement and control of temperature, relative humidity, absolute humidity, enthalpy, pressure differential, volumetric airflow and indoor air quality.  The input scale can be set from –99 to 999 units.  The start and end points of output voltage can be any value between 0 to 10 VDC.
 
The maximum number of NC24A slaves in a Modbus RTU network is 32.   Optional BACnet MS/TP Gateway module (BMG-NC24A) is available for order.  It works as an interface to link up the NC24A controllers with BACnet MS/TP communication bus.  Please refer to the product bulletin of BMG BACnet MS/TP Gateway for details.
 
  • 24 VAC supply voltage
  • Large LCD with backlight
  • Support Modbus RTU protocol
  • One universal input + one 0...VDC input
  • Two 0...10 VDC outputs + one 2-position     24 VAC on-off output
  • PI Algorithm
 
Product Bulletin
NT10
Modbus RTU Networking LCD Thermostat
The NT10 Series RS485 Modbus RTU networking LCD Fan Coil applies communication technology of Modbus RTU master/slave protocol to monitor and supervise year around air conditioning units in commercial, industrial and residential Installation. Typical application includes the control of fan coil units, packaged terminal air conditioners and combination heating and cooling equipment, as part of the system that consists of two-way or three-way valve and a multispeed line voltage fan. The maximum number of NT10 slaves in a Modbus RTU network is 32.

Optional BACnet MS/TP Gateway module (BMG) is available for order. It works as an interface to link up the NT50 thermostats with BACnet MS/TP communication bus. Please refer to the product bulletin of BMG BACnet MS/TP Gateway for details.

 
Supply Voltage:         220 VAC +/- 15%, 50/60 Hz
Setpoint Range:        5…35 oC
Shipping Weight:       550 g
Product Bulletin
NSM
Modbus RTU Networking Setpoint Module
NSM is an active LCD Set-point Module energized by 24 VAC supply.  It provides two 0...10 VDC   signals to the external controllers which are directly proportional to display read-out of sensing device and set-point range.  24 VAC digital output is activated by the system button that gives signal to   external controller for      purposes of energy-saving mode or other status on-off control applications.  NSM allows authorized agent to change certain number of operating parameters.
 
Product Bulletin
NT900
BACnet MS/TP Touch-screen LCD Networking Thermostat
The NT900 Series networking touch-screen room thermostats are BACnet Master-Slave/Token-Passing (MS/TP) networked devices designed in strict accordance with ASHRAE standard 135-2001 and are considered “native” BACnet devices. These thermostats provide line voltage or   24-VAC on-off control or 3-wire floating or 0-10 VDC output to control valves in 2-pipe or 4-pipe fan coil units.
 
The technologically advanced NT900 Series thermostats feature a BACnet MS/TP communication capability that enables remote monitoring and programmability for efficient space or return air temperature control.

Supply Voltage:         220 VAC +/- 15%, 50/60 Hz
Setpoint Range:        5…35 oC
Shipping Weight:       550 g
   
第1页,共2页